SZG Series Conical Vacuum Dryer

• Customization: Available
• After-sales Service: on Site or Online Technical Support
• Warranty: All Its Life
• Model NO.: SZG
• Movement Way: Static
• Heating Mode: Steam, Electricity
• Material Status: Bulk
• Drying Medium: Superheated Steam
• Type: Double Cone Rotating
• Certificate: CE
• Material: SS316, SS304
• Spare Parts: Provided
• Guarantee: 12 Month
• Transport Package: Export Plywood Case
• Specification: 1135x810x1020mm
• Origin: Jiangsu
• Package Size: 150.00cm * 130.00cm * 220.00cm
• Package Gross Weight: 1050.000kg

Product Description

SZG Conical Vacuum Dryer

Description
SZG Series Conical Vacuum Dryer is a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, i.e. belt or chain. Therefore it is stable in operation. The special design guarantees two shafts realize good concentricity. Heat medium and vacuum system all adopt reliable rotating connector with the technology from USA. On this basis, we also developed SZG-A. It can carry out steepless speed change and constant temperature control.
As a specialized factory in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you.
Let heat source (for example, low pressure steam or thermal oil) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shell;
Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. The purpose of reinforced drying can be realized;
The raw material is under vacuum. The drop of steam pressure makes the moisture (solvent) at the surface of raw material become saturation and will evaporate. The solvent will be discharged through vacuum pump and recovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be realized within a short time.

Application
It is suitable for the raw materials that need to concentrate, mixed and to be dried at low temperature (for example, biochemistry) products in chemical, pharmaceutical and foodstuff industries. Particularly it is suitable for the raw materials that are easy to be oxidized, volatilized and have night heat sensitivity and is toxic and not permitted to destroy its crystal in drying process.

Technical Data

item		Specification
name	unit	100	200	350	500	750	1000	1500	2000	3000	4000	5000
total volume	L	100	200	350	500	750	1000	1500	2000	3000	4000	5000
working volume	L	50	100	175	250	375	500	750	1000	1500	2000	2500
heating area	m ^2	1.16	1.5	2	2.63	3.5	4.61	5.58	7.5	10.2	12.1	14.1
speed	rpm	6							5	4	4	4
power	kw	0.75	1.1	1.5	1.5	2	3	3	4	5.5	7.5	7.5
rotating height	mm	1810	1910	2090	2195	2500	2665	2915	3055	3530	3800	4180
total weight	kg	825	1050	1350	1650	1800	2070	2250	3000	4500	5350	6000
design pressure inside the tank	mpa	-0.09~-0.15
design pressure of jacket	mpa	0.3

Speed adjusting motor of 0-6rpm might be chosen according to the user's requirements. The following aspects should be point out when to order:
1. The above-mentioned parameters are calculated based on material density of 0.6g/cm³. If it's over, please point out.
2. If certificate for pressure vessel is required, please point out.
3. If glass lining for interior surface is required, please point out.
If the material is explosive, or flammable, the calculation should be made according to trial result.
When oil is used to heat, use automatic constant temperature control. It can be used for drying biology products and mine. Its temperature of operation can be adjusted form 20-160 ºC .
Compared to ordinal dryer, its heat efficiency will be 2 times higher.
The heat is indirect. So the raw material can not be polluted. It is in conformity with the requirement of GMP. It is easy in washing and maintenance.